STAAD.Pro Course – Structural Analysis and Design
The STAAD Pro course shows civil and structural engineers how to model a frame, apply loads, run the analysis and read the results with understanding rather than clicking blindly. Book a free demo class and a counsellor will share the complete outline, fees and batch timings.
Book your free demo class
Send your details on WhatsApp and get the outline, fees and timings.
Quick answer
STAAD.Pro is structural analysis and design software from Bentley Systems. The course covers modelling beams, columns and slabs, defining supports and loads, load combinations, running analysis, and interpreting results for design as per applicable codes.
- Software
- STAAD.Pro
- For
- Civil and structural engineers
- Prerequisite
- Structural analysis basics
- Mode
- Live online
- Duration
- Shared by counsellor
About the STAAD.Pro Course
Structural analysis software is only as good as the engineer using it. The course is built around understanding: what each input means, why a support is fixed or pinned, how loads combine and how to read the output critically.
You model typical frames, apply loads according to the design basis, run analysis and design checks, and compare results with hand estimates. This verification habit is what prevents expensive mistakes.
The course also shows how analysis connects to drawings: exporting geometry to AutoCAD, and how results feed detailing, so you see the whole workflow from model to drawing.
Who should take the STAAD.Pro Course?
Civil final-year students
Project work with a real analysis model.
Junior structural engineers
Model and check frames faster.
Site engineers
Understand what the design office sends.
What you will be able to do
- Model beams, columns and slabs
- Assign sections, materials and supports
- Apply dead, live, wind and seismic loads
- Create load combinations
- Run analysis and interpret bending moment and shear
- Perform basic concrete and steel design checks
Your first month. You model a simple frame, apply loads and read the first set of results.
A worked example from class
You model a three-storey RCC frame on a grid, assign beam and column sizes, add supports at the base and apply dead and live loads. You create load combinations, run analysis and read the bending moment diagram of a beam. You compare one result with a hand estimate to confirm the model is sensible.
What you need to practise
- STAAD.Pro access through a student or commercial licence
- Structural analysis fundamentals
- A sample frame with dimensions and loads
- A design code reference
- A calculator for hand checks
How progress is assessed
A frame model is assessed on geometry, loading, combinations and your ability to explain the results and their limits.
STAAD.Pro Course syllabus
Your trainer adjusts pace and depth to the batch. The counsellor shares the detailed module list when you enquire.
1. Geometry
Topics covered
Topic list
- Nodes, beams, plates
- Import from AutoCAD DXF
2. Properties and supports
Topics covered
Topic list
- Sections and materials
- Supports and releases
3. Loads
Topics covered
Topic list
- Dead, live, wind and seismic inputs
- Load combinations
4. Analysis
Topics covered
Topic list
- Running and checking errors
- Reading bending moment and shear
5. Design
Topics covered
Topic list
- Concrete and steel design basics
- Design output
Module by module: what you actually do
Geometry
Nodes and members are created using the grid, copied by repeat commands and checked for connectivity.
Properties and supports
Sections and materials are assigned, and supports and releases are defined to match real conditions.
Loads
Dead, live, wind and seismic loads are applied, and combinations are generated from the design basis.
Analysis
The model is analysed, errors are read and fixed, and results are viewed as diagrams.
Design
Concrete and steel members are designed or checked, and the design output is interpreted.
Reports and drawings
Results are exported, and geometry is exchanged with AutoCAD for detailing.
How the training works
- 1. Book a free demo class
- 2. Receive the course outline, fees and timings
- 3. Get matched with a suitable trainer
- 4. Attend live classes and draw along
- 5. Finish project drawings with feedback
- 6. Receive your completion certificate
Projects you will work on
- A G+3 RCC frame model
- A steel truss
- A beam-column design check
Software in a structural workflow
| Tool | Use |
|---|---|
| AutoCAD | Drawings and details |
| STAAD.Pro | Analysis and design |
| Revit | BIM model and coordination |
Mistakes we fix early
| Common mistake | What to do instead |
|---|---|
| Wrong support conditions | Check supports against the real structure |
| Missing or wrong loads | Cross-check load values with the design basis |
| Trusting output blindly | Verify with simple hand calculations |
| Unconnected members | Check connectivity before analysis |
Who this is not for. If you have not studied structural analysis at all, learn the basics first so you understand what the output means.
How this is used in real work
Structural consultancies use analysis software for nearly every building, but the quality of the model varies hugely. Reviewers look for sensible supports, loads and checks rather than pretty screenshots.
Local codes and design basis differ by project, so we teach the method and show where to set the code.
Careers and next steps
Structural design firms and consultancies hire graduates who can model and check frames. Understanding the theory behind the output matters more than the software buttons.
Roles include junior structural engineer, design engineer trainee and analysis assistant. A portfolio with a frame model, load summary and key results is helpful.
Add Revit and AutoCAD to connect analysis with documentation.
Useful reference: STAAD (Bentley Systems).
Fees
Fees depend on the number of hours, batch type and track, so the counsellor shares the exact amount with your outline after the demo. See the fees guide to understand what changes the price.
STAAD.Pro Course FAQs
Do I need structural analysis theory?
Basic theory is expected. We refresh key points as needed.
Does STAAD support Indian codes?
It includes several Indian design codes. Your trainer shows how to select them.
Is AutoCAD needed?
Helpful for importing and detailing.
Free demo?
Yes.
Do I need to know structural analysis?
Yes, at least the basics from your degree or diploma.
Does it follow Indian codes?
STAAD.Pro supports several Indian codes. Your trainer shows how to select and use them.
Is this a design certification?
No. It is software training, not a licence to certify structures.
Can I use results directly in a project?
Results must be checked and approved by a qualified engineer.
Related courses
Try a free demo class before you decide
Message us and a counsellor will share the outline, fees and batch timings, then match you with a trainer.